Getting started in a new case
Other languages
Right after a case is activated, Claira offers to run an early case assessment, set up the fields it writes to and build a Case Context, in one click. What each step does, what Set up does, and how to finish or hide what is left.
Getting started in a new case
Every Discover case needs the same few things at the start: a first look at what the case holds, fields for Claira's answers, and a Case Context that tells Claira what the case is about. Right after a case is activated, Claira offers all of them in one short dialog, Get started in this case. One click sets up everything that needs no typing, in the right order, and anything you skip waits in Agent Mode for later.
When it appears
- Right after activation, for the first person to open Claira in the case. That is normally whoever activated it: the dialog opens over Agent Mode as soon as activation finishes.
- When Claira staff activate a case for you, the first person from your team to open Claira in the case gets the dialog.
- Everyone in the case sees a card at the top of Agent Mode while a step is still open, including whoever closed the dialog. See The Getting started card.
- Once per activation. Closing the dialog, with Not now or by leaving Claira, uses up the offer. The card stays. If a case is deactivated and activated again, the first person to open Claira afterwards is offered the dialog again, unless every step is already done.
- Not on cases activated earlier. Cases that were already active when Getting started arrived show neither the dialog nor the card.
- Not if you turned it off. If you chose not to have Getting started suggested on new cases (see Turning it off), you are not offered the dialog, and the next person to open Claira in the case gets it instead.
What the dialog offers
The dialog lists the steps the case needs, each with one line on why it matters and a Learn more link. None of the steps uses tokens; the dialog says so on the early case assessment row only. A step that is already done shows Done, whoever did it, and has nothing to tick.
Connect your model
On a Claira Private case, the first row is Connect your model: the case runs on your organization's own model, and Claira needs it before it can build a Case Context or scan. Click Set up your model to open the model setup in Settings, as described in Set up Claira Private. This row has no checkbox: Set up does not run it.
Early case assessment
Ticked by default. A first look at the whole case: how many documents, whose they are, what kinds of file and when they are dated.
- It is free: it uses no tokens.
- It reads only metadata and writes nothing to Discover.
- It takes about a minute for every 200,000 documents and keeps going while you use the rest of Claira. Closing the browser tab while it is reading stops it, and the browser asks first.
Where an early case assessment cannot run, for example while a local model is turned on in a Claira Private case, this row is not shown. See Early case assessment.
Fields for Claira's answers
Ticked by default. Claira writes its answers into Discover fields, and the row lists the exact names of the fields it will set up before you click anything:
- 🟢 Claira - AI Response, for scan answers. It is listed only when the case has no field for answers yet.
- 🟢 Claira - Log, which records which scan touched each document.
- 🟢 Claira - Prompt Log, which records the prompt each scan used.
For each one, Claira uses a connected field that already has the name (marked already connected), connects again a field this case used before (marked used before, reconnected), or creates a new Memo field. If the case already has a field with that name that Claira cannot use, it adds a number, for example 🟢 Claira - Log 2. How Claira chooses is described in Setting up the Log Field and the Prompt Log field.
Under Add fields for:, click any of Objective coding, Relevance, Issues, Key documents, Chronology, Summary, Privilege and PII to add a field for that review, for example 🟢 Claira - Relevance. Objective coding adds five: Document Title, Author, Recipients, Document Type and Document Date. They carry the names the Objective coding Multi-Code template uses, so loading that template connects them for you, and Document Date is created as a Date field so you can sort on it. Each name joins the list as you click, so you see it before anything is created.
Before you click Set up, Who can use these fields lets you choose who gets read and write access to the fields Claira creates: All groups (every group in this case, selected unless you change it) or My groups (only the groups you belong to, so a scan run by someone in another group cannot write to the fields until access is widened). One choice covers every field the step creates, and their scans can write to them at once. On an older Nuix Discover version, or when your Discover role cannot see the case's groups, new fields start hidden instead: until a case administrator gives your team read and write access, under Case Setup > Fields, on the field's Security tab, scans cannot write to them. Then, after Set up, Copy steps for your admin copies the instructions to send. See Creating fields with Claira.
Case Context
Off by default. A Case Context tells Claira what the case is about: parties, issues, key dates. Prompts, Insights and the Agent use it once you approve it. Building it uses no tokens. Claira builds it from up to 5 documents you select in Discover, typically your pleadings, so this row follows your selection:
- Nothing selected: there is no checkbox. The row asks you to select your pleadings (or the documents that best describe the case) in Discover, up to 5.
- 1 to 5 documents selected: the checkbox appears, ticked, and the row says how many documents it will build the context from. If you select documents while the dialog is open, the row becomes available and ticks itself.
- More than 5 selected: there is no checkbox. The row says how many documents are selected and asks you to select up to 5.
When the row is available, choose the Kind of matter. It is the same choice of templates as New context on the Case Context page, each with its description: Claira starts on Litigation / eDiscovery, and Change lists the others. Learn more about templates explains each one.
If the case already has a Case Context draft and none is approved, the row says A draft is waiting for your review and approval. and offers Review instead, so you finish that draft rather than start another. See Setting up Case Context.
Setting it up
- Untick anything you do not want to set up now.
- Click Set up 3 things. The button counts what is ticked.
Claira runs the ticked steps in order: the early case assessment first, because it takes longest and counts metadata while the rest is done, then the fields one at a time, then the Case Context. The dialog becomes Getting this case ready and shows each step's progress, for example Counting metadata · 2 min left, 3 fields set up or Draft ready to review.
Everything keeps going if you close the dialog. Closing it never stops a step. While Claira is still setting up, Continue setting up on the card reopens the dialog on its progress.
As each step finishes, the dialog offers the next thing to do:
- Early case assessment: Open the assessment takes you to it.
- Fields: when some new fields could not be opened to the case's groups, Copy steps for your admin copies a ready-to-send message for the case administrator, with those fields' names and the steps to give your team access.
- Case Context: Claira creates the context from the template you chose, opens it in Case Context and builds it from the selected documents. Review the Case Context takes you there. Read it through and click Approve when it is right: Claira never approves a context for you, and prompts, Insights and the Agent use it only once it is approved.
If the selection in Discover changes after you click Set up and no longer holds 1 to 5 documents, Claira skips the Case Context rather than build it from the wrong documents, and the step stays open on the card.
To close the dialog without setting anything up, click Not now. Nothing is lost: the card waits in Agent Mode.
The Getting started card
While a step is still open, a card sits at the top of Agent Mode, above the starter prompts of an empty chat, for everyone in the case. Its title counts the steps, for example Getting started · 2 of 3 done, and each step is ticked off as it is done.
- Continue setting up reopens the dialog on the steps that are left.
- The Getting started options menu (the three dots) has Hide for this case and Don't suggest on new cases.
When the last step is done, the card disappears. If you finished it from the dialog and Celebrations is on, Claira marks the moment with This case is set up.
When a step counts as done
Claira checks the case itself, so a step done anywhere else, or by a teammate, is ticked off too:
| Step | Done when |
|---|---|
| Connect your model | The case's model connection is set up. |
| Early case assessment | The case has an early case assessment, whoever ran it. |
| Fields for Claira's answers | The Log Field and the Prompt Log field are both set, and at least one other field is connected for answers. |
| Case Context | A Case Context is approved. |
Turning it off
- Hide for this case, in the card's menu, hides the card for you in this case. Everyone else still sees it.
- Don't suggest on new cases, in the card's menu, hides the card and stops offering the dialog to you, in every case.
- In Settings, under Your settings, the Getting started on new cases switch (just below Celebrations) turns the suggestion off or back on for all your cases.
If a step does not finish
- The early case assessment could not run, or the tab was closed while it was reading. Nothing was saved. Click Continue setting up on the card and set it up again, or start one from Early case assessment in the Claira menu.
- Some fields could not be set up. Click Open Connected fields: Connected fields in Settings shows why, and who can finish the job, for example when your Discover role does not allow creating fields. See Setting up the Log Field and the Prompt Log field.
- The Case Context could not be built. Open Case Context and build it from your selected documents there. See Setting up Case Context.
Related
Was this page helpful?
Continue reading
Need more help?
Contact our support team at support@claira.to — we are here to help.