ClairaClaira Help Desk

Personal data register

Other languages

Turn a personal data scan into one table, a row per person and kind of data, with the values as written and the documents each appears in.

Personal data register

Turn a personal data scan into one table, a row per person and kind of data, with the values as written and the documents each appears in.

InsightsQuickstartPersonal data register

What this template produces

A table with four columns: Person, Kind of data, Values as written and Sources. Each person gets one row per kind of data found about them (name, contact details, date of birth, government identifier, financial, health and so on), with every value copied exactly as it appears and every document it appears in cited on the row. Values that cannot be tied to a named person are listed last, under Not attributed. Under the table, the Insight says how many documents held no personal data.

It is the list a breach notification, a data subject request or a redaction pass starts from: who is in these documents, what is held about them, and where.

What it reads

This Insight reads the list of personal data per document: the output of the Comprehensive PII (surface forms) prompt. If your Discover case has not run it yet, Claira offers to run it before generating. Results from Special category data (GDPR Article 9) work too.

Claira PIIMemoQuoted values exactly as written, separated by commas, or NO PII DETECTED

Two ways to reach it

You do not have to remember this template exists. If you run the Comprehensive PII (surface forms) prompt as a bulk scan, the completed task offers this Insight directly:

On a finished bulk scan task: “These results can make a Personal data register.” Select Generate insight and you are done: the source is already known.

Otherwise, open Insights, select Quickstart and, on Personal data register, select Expand. The card shows the template's two prompts as two numbered steps. Scan prompt is the prompt that runs on each document in Bulk Scan and writes one answer per document to a field, shown with its version number; it offers Open in Bulk Scan and Pick a field instead. Insight prompt is the prompt the template puts in the box, which turns those answers into one report. Use this template fills the Insight prompt and, when a completed bulk scan task in this case ran the matching prompt, selects that run as the source; the template then shows as one chip in the card, which you can remove. If no completed task has run the prompt, Claira warns you when you pick a bulk task as the source rather than blocking the Insight.

The insight prompt

This is what the template puts in the Insight prompt box. Edit it freely: once it is in the box it behaves like any other insight prompt.

Build a register of the personal data in these results, as a table with the columns Person, Kind of data, Values as written and Sources. Give each person one row per kind of data, for example name, contact details, date of birth, government identifier, financial or health. Copy every value exactly as it was found and cite every document it appears in on that row. Use each person's name as it is written, and do not merge names that might belong to the same person. Put values that cannot be tied to a named person in a last group called Not attributed. Leave out documents marked NO PII DETECTED, and under the table say how many there were.

Step-by-step in Claira

  1. Open Insights in your case, select Quickstart and find Personal data register.
  2. If a completed task in this case already ran the prompt, select Use this template: the source fills in and you can go straight to the last step.
  3. If nothing has, select Expand on the card, then Open in Bulk Scan under Scan prompt. Claira opens Bulk Scan with the Comprehensive PII (surface forms) prompt filled in: choose your documents and a destination field, then start the scan and check the estimated token usage on the confirmation.
  4. When the task finishes, it offers to generate the Insight. Nothing is queued or charged while it runs.
  5. Edit the prefilled insight prompt if you want, then select Generate Insight.
Already have this data from somewhere else? Under Scan prompt, select Pick a field instead and choose the field yourself. Claira does not guess which of your fields holds the right kind of value.

The template points at the Comprehensive PII (surface forms) prompt template, the same one you would pick yourself from the prompt library. The insight template does not carry its own copy, so improvements to the prompt reach every case.

From the register to find and redact

A register generated from this template shows Generate search terms in its viewer. It opens a new Agent chat with the register attached and asks for one search term family: a label for each person and kind of data, and each value as an exact phrase. The Agent shows the family on a card with Download spreadsheet, ready to import in Nuix Discover with Add search terms > Add terms from a file. From there, Discover's own find and redact does the rest. See Generating search term families.

Check the terms on a sample before you rely on them: a short value such as a first name or a four-digit number will match far more than the person you meant.

What Claira keeps

A register is a list of personal data, and like every Insight it is kept with your case, with the values it was generated from, until you delete it. Deleting the Insight removes it and those values. Download it to Excel if you need to keep working on it after that.

Limits

An Insight reads up to 25,000 documents from a bulk scan, or 1,000 from a selection, and stops at a total length. For a larger set, generate one register per custodian or per load and combine the Excel downloads.

The register is built from what each document's scan found, one document at a time. The same person written two ways ("J. Smith" and "Jane Smith") appears as two people; merge them in the Excel download once you have confirmed they are the same.

  • Name the kinds of data that matter for your notification or request, so the Kind of data column uses your categories.
  • Ask for one row per person only, with the kinds of data in a single cell, when you need a notification list rather than a redaction list.
  • Add a column for the jurisdiction or the notification threshold if your prompt asked the scan for it.

Troubleshooting

  • Most values land under Not attributed. The documents list values without naming whose they are (a column of account numbers, for example). Ask the per-document prompt to name the person each value belongs to where the document says so, and scan again.
  • The same person appears several times. The Insight keeps names as written on purpose. Merge them in Excel after checking.
  • The Insight says the documents are too long. The source is over the limit. Narrow it to one custodian or one load and generate again.

Was this page helpful?

Need more help?

Contact our support team at support@claira.to — we are here to help.

On this page